The Influence Of Honing On The Wear Of Ceramic Coated Piston Rings And Cylinder Liners

Reciprocating wear tests were performed to investigate the effects of honing on the wear of ceramic coated piston rings and cylinder liners. The baseline or control cases consisted of testing ceramic coated rings against ceramic coated liner specimens whose surfaces were ground and lapped smooth. A second series of tests were performed with liner specimens with base and plateau honed surfaces. Test conditions were chosen to simulate the temperatures, pressures, and boundary lubricated conditions present at top ring reversal in a conventional diesel engine. Wear factor comparisons between the baseline cases and the tests with the honed liner specimens indicate that honing alone is not sufficient to ensure an improvement in ring and liner wear.