Nucleation And Propagation Of Magnetic Domain Walls In Cylindrical Nanowires With Diameter Modulations

In all current data storage devices, the information bits are stored in form of domain walls in a thin film or in patterned media on a two-dimensional surface . Within the next decade, further increase of the storage density in these devices is expected to come to a halt due to several fundamental and technological issues. Thus there have recently been efforts to develop three-dimensional devices combining the versatility of solid state RAM with the cost efficiency of common hard disk drives.A particularly interesting theoretical concept for a three-dimensional magnetic memory has been proposed in 2004 by S. Parkin et al. . Their racetrack memory consists of a vertical array of magnetic nanowires with either cylindrical or rectangular cross section. The bits are encoded in a series of up to 100 domain walls per wire. Using nanosecond spin polarized current pulses these walls are shifted past an integrated read head.Magnetic domain walls in cylindrical nanowires have raised the interest of the scientific community due to their possible application in a functional device as well as due to exciting new properties which arise from the geometric confinement. Up to date, only a few pioneering experimental studies on such domain walls exist. They indicate strong pinning effects preventing a deterministic domain wall propagation. So far the microscopic origin of this pinning has only partially been understood. It is expected however that beside the wire geometry the material microstructure may play a considerable role.Situated within the framework of the European FP 7 project m3D, the objective of my work has been to investigate the domain wall propagation in cylindrical nanowires with diameter modulations by means of magnetic force microscopy and micromagnetic simulation. As the domain wall energy increases with the wire diameter, protrusions (resp. notches) are expected to act as an artificial energy barrier (resp. well). Consequently, a deterministic domain wall propagation controlled via the wire geometry seems possible.A first part of my work concerns material optimization. For this, NiCo alloy wires (100-200nm diameter and multiple tens of micrometers in length) with two distinct geometries have been fabricated by template assisted electrodeposition (Chemist collaborators at Univ. Erlangen, Prof. J.Bachmann). I have then explored the impact of the alloy composition as well as of possible post-fabrication annealing on the material microstructure. Subsequently, domain wall propagation in individual nanowires has been investigated under the influence of either a quasistatic magnetic field or a nanosecond magnetic field pulse. In addition I have performed complementary micromagnetic simulations to study the effect of the modulation geometry on the domain wall pinning.