New Partial Interaction Models For Bolted Side Plated Reinforced Concrete Beams

This dissertation, "New Partial Interaction Models for Bolted-side-plated Reinforced Concrete Beams" by Lingzhi, Li, 李凌志, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Existing reinforced concrete (RC) beams often need to be strengthened due to material deterioration or a change in usage. The bolted side-plating (BSP) technique, i.e., attaching steel plates to the side faces of RC beams using anchor bolts, effectively enhances the bearing capacity without significant loss in deformability thus receives wide acceptance. However, as a newly developed technique, only limited information is available in literature, which mainly focused on the overall load-deflection performance of lightly reinforced BSP beams. Little studies have been conducted on the partial interaction between steel plates and RC beams which is closely related to the performance of BSP beams. The longitudinal and transverse slips, which control the degree of partial interaction, have yet to be determined precisely. Accordingly, in this thesis, extensive experimental, numerical and theoretical studies on BSP beams are presented. The experimental behaviour of BSP beams was investigated. For the first time, special effort was put in precisely measuring the profiles of longitudinal and transverse slips. In order to investigate the behaviour of BSP beams under other load cases and beam geometries, a nonlinear finite element analysis was conducted. The numerical method is more economical and capable of overcoming the difficulty in measuring the transverse slips precisely. A new approach to evaluating the transverse bolt shear force was also developed through a parametric study. New partial interaction models were developed by isolating and considering the longitudinal and the transverse partial interaction separately. A longitudinal slip model was developed based on the BSP beam section analysis, in which different strains of steel plates and RC beams were considered but the difference in deflection hence the difference in curvature was not taken into account. Meanwhile, a piecewise linear model was also proposed for the transverse slip and bolt shear transfer by introducing Winkler's model and defining the transverse slip as the difference in deflection. Formulas for the slips, the plate forces, the strain and the curvature factors that indicate the degree of partial interaction, were also deduced. Furthermore, these formulas allow us to evaluate the effect of partial interaction in the BSP strengthening design. A numerical program was originally developed to evaluate the performance of BSP beams with partial interaction. The balance between strengthening effect and strengthening efficiency was also achieved by a parametric optimization study, which would simplify the design procedure of BSP strengthening significantly. According to the numerical and theoretical results, a new design approach for BSP beams, which needs only minor modification to existing design formula for RC beams, was proposed to aid engineers in designing this type of BSP beams and to ensure proper details for desirable performance. Compared to the conventional design methods that assume a full interaction between steel plates and RC beams, this new method not only retains the features such as ease of use and fast calculation, but also yields results that are more reliable. DOI: 10.5353/th_b5089963 Subjects: Concrete beams Reinforced concrete